DECALS APPLICATION INSTRUCTIONS
Clean the area thoroughly with Alcohol or soap and water.
Do NOT use glass cleaner that may leave behind a residue.
Slowly, peel the white paper backing off of the decal.
Carefully, place the decal in the desired location.
Rub firmly with a squeegee or credit card to remove any air bubbles trapped underneath.
Slowly, begin to peel the transfer tape back off of your decal. Do this by sliding it back
onto itself at a tight angle. If your decal begins to pull back up, repeat step 3.
If in step 4, your decal continues to try to peel back off of the surface, repeat step 3 and
then let sit for 2-24 hours to fully adhere. You may use a pushpin to poke small holes
in any remaining air bubbles. The recommended application temperature is 70 degrees.
Too cold or too hot and your decal will not adhere.